Detcon FP-624C - Manual

Detcon MicroSafe
™
FP-624C Combustible Gas Sensor (0-100% LEL)
Operator’s Installation & Instruction Manual
May 18, 2010 • Document #2246 • Revision 7.1
CAUTION:
Before operating the Model FP-624C sensor, read this manual thoroughly and verify that the
configuration of default factory settings are appropriate and correct for your application. The
settings include: Target gas and calibration gas (section 3.7), relay contact outputs (section
3.5.5d), alarm settings (section 3.5.5e and 3.10), and RS-485 ID (section 3.5.5f and 3.12).
detcon inc.