Edwards Signaling 5530MHV User Manual
Page 3
Advertising
![background image](/manuals/366893/3/background.png)
P/N 3100006 • REV 4 • ISS 09AUG10
3 / 7
Figure 4: Wiring the Adaptatone
Figure 5: Wiring a dry relay contact to 24 V input board,
method 1 (refer to Applications Engineering for compatibility
with earlier versions of Adaptatone)
Figure 6: Wiring a dry relay contact to 24V input board, method
2
Figure 7: 24 VDC strapped input, 24 V input board
Figure 8: Wiring to 24 V input board with an open collector
transistor
Figure 9: Connecting 24 V input board in parallel with
Adaptatone “B” (limit of 5 “M” models)
Figure 10: Connecting 24 V input board to a PLC. See Table 5
Advertising
This manual is related to the following products: