Edwards Signaling 116DEGEX-FJ - Manual (Page 3)

WARNING: To reduce the risk of ignition of hazardous
atmospheres and shock, keep assembly tightly closed when
circuits are energized.
Figure 4: Disassembly of the 116 Class fire alarm strobe
WARNING: To reduce the risk of ignition of hazardous
atmospheres and shock, disconnect from the supply and
circuit and allow five (5) minutes for stored energy to
dissipate before disassembling the unit.
Figure 5: Wiring
Legend
Strobe
Wire nut
Notes
•
DC polarity of circuit shown in supervisory state (signal inactive). Reverse circuit polarity to activate signal.
• Electrical supervision requires wire run to be broken at each device.
• Device for constant input voltage. Do not connect to “coded” or pulsating voltage.
• For non-fire alarm use, i.e., without field wire supervision, the installer can tie the two white leads together and tie the two black leads
together.
Figure 6: Mounting options
P/N 3101131 • REV 04.00 • ISS24JUN11 3 / 6