Edwards Signaling 48XBRM Series - Manual (Page 3)

P/N 3101569 ISSUE 3
Replacement Parts
Component Catalog Number
Lens* - 48XBRM Series 96-L(*)
*Specify color of lens by adding one of the following letters to the catalog number: A-amber,
B-blue, G-green, or R-red, C - clear (used with white LEDs). Example: A red lens for the 48XBR
series signal is 96-LR.
Maintenance
Cleaning
Periodically clean the lens surface with a soft cloth or sponge
and water or a mild detergent solution to maintain optimum
light visibility. Ensure that the lens is completely dry before
assembling the signal.
To prevent damage to the lens, do not use
abrasive materials or cleaners.
CAUTION
Figure 4. Flash Pattern Dipswitch Settings
STEADY
(FACTORY
DEFAULT)
OFF
OFF
ON
ON
1
2
OFF
OFF
ON
ON
1
2
OFF
OFF
ON
ON
1
2
STEADY
65 FPM
Table 1. PLC Compatibility
Operating Maximum off state Continuous on Surge (inrush/duration)
Cat. No. voltage* leakage current (mA) current (mA) (A/µs**)
48XBRM( )24D 24V DC 5 215 34.5/52
48XBRM( )120A 120V AC 5 108 37.5/164
*All AC volts at 50/60 Hz
**Amps/microseconds
LED Light
Source
Flash Pattern
Dipswitch
Base
Figure 3. Dipswitch Location