Fire-Lite CHG-120F Battery Charger User Manual
Page 13
Connecting Batteries to the Charger
Installing the Charger
CHG-120F Instruction 03/21/01 PN 50888:B0
13
Connecting Four Batteries - Figure 6 illustrates how to connect four 55 AH batteries to
the charger:
Figure 6 Connecting Four Batteries to a Charger
Table 4 contains instructions for connecting four batteries to the charger:
Warning: Do not
connect the Battery
Interconnect Cable
at this time.
Refer to “Starting the
Charger” on page 25.
!
TB2
Step Action
1
Remove all power sources to the charger.
2
Tie the batteries in pairs by connecting the battery negative terminals and the
battery positive terminals as shown in Figure 6.
3
Connect the battery negative cable to the TB2 terminal (on the charger) labeled
“Battery –” as shown in Figure 6.
4
Connect the battery positive cable to the TB2 terminal (on the charger) labeled
“Battery +” as shown in Figure 6.
5
Proceed to the section “Connecting the Charger.” Do not connect the Battery
Interconnect Cable at this time—refer to “Starting the Charger” on page 25.
Table 4 Connecting 55 AH Batteries