Fire-Lite IPDACT-2UD Technical Reference - Manual (Page 34)

IPDACT-UD - Configuration
III-31
Doc.DM385-I
Rev. 2.0
III - 4.3. IPDACT-UD generic configuration
Configures data pertaining to the IPDACT-UD which is not related to the
monitoring function and the sending of alarms. Data included here is the
IPDACT-UD IP address, the access gateway to the Teldat VisorALARM, the
console access password, the events you wish to view, use of the check digit
in the telephone console, etc.
In the following figure, the default values are displayed. Press z to return to
the previous menu.
-- Generic IPDACT-UD config --
IP Connectivity
a) DHCP client: OFF
b) IP addr: 192.168.0.100 msk: 255.255.255.0
c) Gateway IP: 192.168.0.200
User Access Control
d) Password: 24680
Miscellaneous
e) Date & time: 06/16/2003 12:41:25
f) Events: PHON
g) PC verifying digit: 0
z) Exit
option:
III - 4.4. Monitoring configuration and sending of alarms
Configures everything relative to the IPDACT-UD as a security element.
Permits you to configure the account number associated to the IPDACT-UD,
the Teldat VisorALARM IP address and the UDP port used for
communication, the passwords used to encrypt the IPDACT-UD messages
(local password) and that used to decrypt the Teldat VisorALARM messages
(remote password), the interval used to send the monitoring messages (keep-
alive) and the number of retries and the time between these in cases where
the Teldat VisorALARM does not acknowledge them. Lastly this also permits
you to configure the number of digits a telephone number has, the number of
times an alarm is sent to the Teldat VisorALARM until this can be sent over
the telephone line and the telephone number dialed by the control panel to
execute bi-directional operations in call-back mode.
The following figure displays the default values. Press z to return to the
previous menu.