Fire-Lite PRN-6 Reference-Manual - Manual (Page 41)

✔ ✔ <ESC>_<0> overscore mode OFF
✔ ✔ ✔ ✔ <ESC>0 Set line feed to 1/8 inch
✔ ✔ ✔ <ESC>1 Set line feed to 7/72 Inch
✔ ✔ ✔ ✔ <ESC>2 Set line feed to 1/6 inch
✔ ✔ <ESC>2 Set line feed to n/72 inch
✔ ✔ <ESC>3<n> Set line feed to n/180 inch (<n> = 0 - 255)
✔ ✔ ✔ <ESC>3<n> Set line feed to n/216 inch (<n> = 1 - 255)
✔ ✔ <ESC>4 italic mode ON
✔ ✔ <ESC>4 setting top of form
✔ ✔ <ESC>5 italic mode OFF
✔ ✔ <ESC>5<1> automatic line feed ON
✔ ✔ <ESC>5<0> automatic line feed OFF
✔ ✔ <ESC>6 print ASCII codes 128 to 159
✔ ✔ <ESC>6 character set 2 (extended)
✔ ✔ <ESC>7 suppress ASCII codes 128 to 159
✔ ✔ <ESC>7 character set 1 (Standard)
✔ <ESC>8 paper end detector OFF
✔ <ESC>9 paper end detector ON
✔ ✔ <ESC>a<n> select justification and centering mode
<n> =
0 ➵ left justification
1 ➵ centered
2 ➵ right justification
3 ➵ left and right justification
✔ ✔ <ESC>A<n> Set line feed to n/60 inch (<n> = 1 - 127)
✔ ✔ ✔ <ESC>A<n> Set n/72 inch line feed (<n> = 1 - 85)
✔ ✔ <ESC>b<m><0> clear all tab settings
✔ ✔ <ESC>b<m><n><0> set vertical tabs in channels <m> = 0 - 3
<n> = 1 - 154
✔ ✔ ✔ ✔ <ESC>B<0> reset all vertical tab stops
✔ ✔ <ESC>B<n1>..<n16><0> set vertical tab stops
✔ ✔ <ESC>B<n1>..<n64><0> set vertical tab stops
✔ ✔ ✔ ✔ <ESC>C<0><n> set form length in inches (<n> = 1 - 22)
✔ ✔ ✔ ✔ <ESC>C<n> set form length in lines (<n> = 1 - 127)
✔ <ESC>d<n1><n2> set relative horizontal step
Formula: n = relative print position
<n2> = INT (n/256)
<n1> = n MOD 256
IBM IBM Epson Epson IBM-
MTPL Propr. Propr. FX850 LQ850+ AGM Code Function
XL XL24 FX1050 LQ1050+
List of available control codes
2 - 12
BACK QUIT
?