Configuring input/output, Ules (see, Relays (see – Fire-Lite PS-Tools MS-9200UDLS User Manual
Page 36: Relay
Advertising
Configuring Fire Panels
28
198 Pt Addr. Panel
PS-Tools
08/2010
Configuring Input/Output
The input/output devices include the zones, NACs, and relays. You can configure each relay, zones,
special zones and NACS in the Input/Output Configuration pane.
Figure 5-3
Configuring Input/Output
Relay
The fire panel consists of one fixed and two programmable Form-C dry contact relays. The fixed
fail-safe relay monitors system troubles. The two programmable relays are factory default. They can
be programmed for system alarm and system supervisory, and configured for the following
operations.
•
Alarm
•
Supervisory
•
Supervisory Auto Reset
•
Trouble
•
Communication Fail
•
Process Monitoring
•
Process Monitoring Auto Reset
•
AC loss
•
Hazard
•
Medical
•
Silenceable Alarm
Advertising