Display fm (fm mode) – GW Instek GDB-03 User Manual

Page 42

Advertising
background image

GDB-03 Demo Module User Manual

40

Display FM (FM mode)

Step

1. Connect a probe to the FM

terminal on the demo board.
Connect the grounding clip to the
ground terminal ( ).

2. Connect the other end of probe to

CH1 terminal on the GDS-3000.

3. Press the Test key on the front

panel of the GDS-3000.

4. Press the Demo button.

5. Press the Digital mode button (F1

button). Use the Variable knob to
select FM mode. Press the Select
button to confirm FM mode is
selected.

Advertising
See also other documents in the category GW Instek Equipment: