GW Instek GDS-122 User Manual - Manual (Page 13)

Using the Oscilloscope
25
MENU
CH1 SETUP
CH2 SETUP
OFF
Inverted
ON
F4
Invert off Invert on
Selecting the
magnification
1. Press the MENU key and use the Up/Down
keys to select the CH1(CH2) SETUP menu.
2. Press F3 (Probe) repeatedly to select the probe
magnification ratio.
MENU
CH1 SETUP
CH2 SETUP
1 X
Probe
1000 X
100 X
10 X
F3
26B
Configuring horizontal settings
Overview The horizontal settings configure how the
waveform appears in terms of horizontal or time
scale.
Position Sets the horizontal position of the
waveform.
Scale Sets the horizontal scale (time per
graticule). Range: 100ms/s to 10s/s
Setting the
horizontal
position
1. Press the OSC OPTION key
repeatedly until the following
menu appears on the display.
– Time
OSC
OPTION
GDS-122 User Manual
26
2. Use the Left/Right key to change the horizontal
position.
Original
Selecting the
horizontal scale
1. Press the OSC OPTION key
repeatedly until the following
menu appears on the display.
– Time Base
OSC
OPTION
2. Use the Left/Right key to change the horizontal
scale.
Original