GW Instek GDS-3000 Series DS3-PWR Power analysis manual - Manual (Page 20)

GDS-3000 Power Analysis User Manual
20
Harmonics
Harmonics parameter overview
All the following parameters are used for
harmonic measurements.
Measurement None IEC 61000-3-2 *
Frequency (Hz)   All classes
Magnitude (%)   All classes
Mag. RMS (A)   All classes
Phase (˚) 
Limit (A)  A, B C.1, C.3,D
Limit (%)  C.2
Pass | Fail  All classes
Max all
Windows (A)  All classes
200% Limit  All classes
POHC Limit  All classes
THD-F   All classes
THD-R 
RMS   All classes
Overall  All classes
POHC  All classes
POHL  All classes
Input Power  C.3, D
Power Factor  C.1, C.2, C.3
Fundamental
Current  C.1, C.2, C.3