GW Instek GFG-3015 - Manual (Page 13)

GFG-3015 p.9
Start/Stop Phase
Range
-90º ~ +80º
Rate 0.01Hz~10kHz
Frequency Range 0.1Hz ~ 1MHz(Useful to 10MHz)
Ext Trig Frequency
Range
DC to 1MHz,TTL compatible input level
Trigger
Gate or Burst Implement by Trigger setting.
Range
100:1(0 to 10V± 1V) In Same Frequency
Range
Input Linearity <0.5% to 1MHz,<5% to 10MHz
VCF
Input Impedance 10 k Ω
Level ≧ 3Vpp
TTL Output
Fan-out >10 TTL Load
GCV Output
To set the voltage between 0.2V to 2V as per different
Frequency in Same frequency Range
INT/EXT Switch Selector
Range 5Hz~150MHz EXT
Accuracy Time Base(10MHz) Accuracy ± 1 count
Time Base
± 20ppm(23ºC ± 5ºC) after 30 minutes
warm up
Resolution
The maximum resolution is 100nHz for
1Hz and 1Hz for 100MHz
Input Impedance 1MΩ // 150pF
Frequency Counter
Sensitivity
≤35mVrms(5Hz~100MHz);
≤45mVrms(100MHz~150MHz)
Interface RS232
Accessories GTL-101 × 2, Instruction Manual × 1, Power cord × 1
Power Source 115/ 230V AC ±15%, 50/60Hz
Dimensions 290 (W) × 142 (H) × 346 (D) mm
Weight Approx. 5kg