GW Instek GPT-9800 series User Manual - Manual (Page 14)

GLC-9000 Quick Start Guide
14
Power and Probe Connection
Mains Power 1. Ensure the power is switched off from the front
panel.
2. Insert the AC mains power into the power
socket on the right-hand side of the rear panel.
The arrow above shows the location of the AC main
power socket.
EUT Power 1. Ensure the power switch is off on the front
panel.
2. Insert the power cord as shown on the right
into the EUT AC Line In.
The arrow above shows the EUT AC line in socket,
located on the left-hand side of the rear panel.