AKG Acoustics CK99L - Manual (Page 13)

5 Specifications
F Frre eq qu ue en nccyy R Re essp po on nsse e
This product conforms to the standards listed in
the related Declaration of Conformity. To order a
free copy of the Declaration of Conformity for this
product, visit http://www.akg.com or contact
[email protected].
Type: pre-polarized condenser microphone
Polar pattern: cardioid
Frequency range: 150 Hz to 18 kHz
Sensitivity at 1 kHz: 8.8 mV/Pa (-41 dBV re 1 V/Pa)
Electrical impedance at 1 kHz: 200 ohms
Power requirement: 1.5 to 10 VDC via MPA V L phantom adapter or AKG WMS body-
pack transmitter
Cable length: 1.6 m (5 ft. 3 in.)
Connector: 3-pin mini XLR
Finish: matte black
Size: 8 x 22 mm (0.3 x 0.9 in.)
Net/shipping weight: 2.5 g (0.09 oz. w/o cable / 115 g (4 oz.)
13
Fig. 4: Microphone
pickup angle.
3. Ask the user not to turn their head more than
30 degrees to the left or right while talking.
(Refer to fig. 4.)
• Talking outside the pickup angle of the micro-
phone will reduce the microphone’s output
level considerably. 4 Cleaning
• To clean the microphone case, use a soft cloth
moistened with water.
CK 99 L
BDA CK 99 L_F031014_Hex_final 09.12.2010 14:28 Uhr Seite 13 (Schwarz/Black Auszug)