GW Instek GUT-6600A - Manual (Page 3)

*Getting Started
The GUT-6600A can be powered in two ways:
1.Insert TWO 9V batteries (in the bottom of the
GUT-6600A, polarity as indicated).
2.Connect a 9 Volt 500 mA DC adapter to the power connector on the back. Use a
2.1 mm plug with the positive pole outside.
*Do not use batteries or adapters with other plug types, polarity or voltages, your
equipment may be damaged.
I. GENERAL SPECIFICATION
Test Voltage:
Average Search Time:
Power Supply:
Dimensions:
Net weight:
Operating temperature:
Storage Temperature:
16 characters in 1 line(LCD Dot Matrix)
14 to 24 pins
TTL74xxx, CMOS40xxx, CMOS45xxx,
DRIVER2xxx
5.0V, 3.3V, 3.0V, 2.5V
0.6 second
2 x 9 volt battery
9V / DC 500mA adapter
160 Ч 110 Ч 45 mm (L W H)
0.4 kg(not included battery)
10 °C to 50 °C
-20 °C to 80 °C
-2-
Display:
Test Pins:
Testable IC series: