GW Instek GOM-801H - Manual (Page 5)

GOM-801H DC MILLI-OHM METER
USER MANUAL
⎯ ⎯
4
3. PRECAUTIONS BEFORE OPERATION
3-1. Unpacking the Instrument
The product has been fully inspected and tested before shipping from the factory.
Upon receiving the instrument, please unpack and inspect it to check if there is
any damage caused during transportation. If any sign of damage is found, notify
the bearer and/or the dealer immediately.
3-2. Line Voltage
WARNING. To avoid electrical shock the power cord protective
grounding conductor must be connected to ground.
AVERISS: Pour éviter les chocs électriques, le fil de terre du
cordon secteur doit impérativement être relié à la terre.
When line voltages are changed, replace the required fuses shown as below:
Model
Line
voltage
Range Fuse
Line
voltage
Range Fuse
GOM-801H
100V
120V 90-110V
108-132V
TT0.3A
250V
220V
230V 198-242V
216-250V T0.2A
250V
WARNING. To avoid personal injury, disconnect the power cord
before removing the fuse holder.
GOM-801H DC MILLI-OHM METER
USER MANUAL
⎯ ⎯
5
4. PANEL INTRODUCTION
Figure 4-1. Front Panel