GW Instek GDS-1000A Series Freewave user manual - Manual (Page 19)

Installing Freewave
19
Connecting the Oscilloscope and Verifying Connectivity
1. Power the oscilloscope up.
2. Select the USB interface by pressing the Utility key, followed by
F5 (More). Then, press F4 (USB Port) repeatedly until Computer
is selected.(GDS-1000A-U and GDS-1000-U only)
Utility
More F5
USB Port
Computer
F4
3. Connect the USB cable between the oscilloscope and PC.
GDS-1000-U, GDS-1000A-U USB
slave port
GDS-3000 series USB slave port