GW Instek GSP-827 Programming Manual User Manual
Page 5
Copyright 2003 GOODWILL INSTRUMENT CO., LTD.
MEASure
PEAK
TRACK?
100
ok
MEAS:PEAK:TRACK?
MEASure TRAce
SAVE
<index>
100
Assign the file (destination) number
for trace saving
1, 2, …100
Note: Before assign the file number, define the
source first. See the next command.
MEAS:TRA:SAVE^2
OK
MEASure TRAce
SAVE
FROM
200
Assign the source for trace saving
Live, TraceA, TraceB
MEAS:TRA:SAVE:FROM:^Live
OK
MEASure TRAce
SAVE
FROM?
100
Query the source for trace saving
MEAS:TRA:SAVE:FROM?
TRACEA
MEASure TRAce
RECALL <index>
100
Assign the file (source) number for
trace recall
1, 2, …100
Note: Before assign the file number, define the
destination first. See the next command.
MEAS:TRA:RECALL:^5
OK
MEASure TRAce
RECALL LOCation
100
Assign the destination for trace recall Live, TraceA, TraceB
MEAS:TRA:RECALL:LOC^TraceA
OK
MEASure TRAce
RECALL LOCation?
100
Query the destination for trace recall
MEAS:TRA:RECALL:LOC?
OK
MEASure TRAce
NAME
<index><nam
e>
100
Assign the trace for read. Refer to
MEAS:TRA:READ?
From A~Z, length is 24 characters.
MEAS:TRA:NAME^2^SYSTEMA
OK
MEASure TRAce
NAME? <index>
400
Query the trace name as assigned
1 to 100
MEAS:TRA:NAME?2
SYSTEMA (for example)
MEASure TRAce
ERASE <index>
100
Erase the identified trace
1 to 100
MEAS:TRA:ERASE^2
OK
MEASure TRAce
DATE?
<index>
200
Query the date of saving trace as
assigned trace
1 to 100
MEAS:TRA:DATE?
OK
MEASure TRAce
ERASE ALL
100
Erase all trace data in memory
MEAS:TRA:ALL
OK
MEASure TRAce
SWITCH LIVE
100
Assign the live trace for dump trace
data. Refer to “MEAS:TRA:READ?”
MEAS:TRA:SWITCH^LIVE
OK
MEASure TRAce
SWITCH TRACEA
100
Assign the trace A for dump trace
data. Refer to “MEAS:TRA:READ?”
MEAS:TRA:SWITCH^TRACEA
OK
MEASure TRAce
SWITCH TRACEB
100
Assign the trace B for dump trace
data. Refer to “MEAS:TRA:READ?”
MEAS:TRA:SWITCH^TRACEB
OK
MEASure TRAce
SWITCH UPPER
100
Assign the Upper (in spilt display)
trace for dump trace data. Refer to
“MEAS:TRA:READ?”
MEAS:TRA:SWITCH^UPPER
OK
MEASure TRAce
SWITCH LOWER
100
Assign the Lower trace for dump
trace data. Refer to
“MEAS:TRA:READ?”
MEAS:TRA:SWITCH^LOWER
OK