Ampro Corporation Single Board Computer 700 User Manual

Page 13

Advertising
background image

Chapter 2

Product Overview

ReadyBoard 700

Reference Manual

7

♦

Supports dual bus master mode

♦

Supports Ultra DMA 33/66/100 modes

♦

Supports ATAPI and DVD peripherals

♦

Supports IDE native and ATA compatibility modes

♦

CompactFlash Adapter (Secondary IDE only)

•

Supports Type I or Type II PC Card socket

•

Supports IDE CompactFlash Card

•

Supports secondary IDE bus with Master/Slave jumper

•

Supports bootable CompactFlash card

•

Floppy/Parallel Interface

♦

Shared floppy/parallel connector

♦

Supports one standard (34-pin) floppy drive and one USB floppy drive

♦

Supports all standard PC/AT formats: 360KB, 1.2MB, 720KB, 1.44MB, 2.88MB

♦

Supports a standard printer port

♦

Supports IEEE standard 1284 protocols of EPP and ECP outputs

♦

Bi-directional data lines

♦

Supports 16 byte FIFO for ECP mode

•

Serial Ports

♦

Four buffered serial ports with full handshaking

♦

Supports two DB9 connectors Serial 1 & 2 (COM1 & COM2)

♦

Supports two serial ports Serial 3 & 4 (COM3 & COM4) through 20-pin header

♦

Provides 16550-equivalent controllers, each with a built-in 16-byte FIFO buffer

♦

Supports full modem capability and RS232 on all four ports

♦

Supports RS485 or RS422 operation two ports Serial 3 & 4 (COM3 & COM4)

♦

Supports programmable word length, stop bits, and parity

♦

Supports 16-bit programmable baud-rate generator and a interrupt generator

•

Infrared Interface

♦

Supports IrDA 1.1 on separate connector (J17)

♦

Supports HPSIR and ASKIR infrared modes

♦

Support IR mode select from the Southbridge

•

USB Ports

♦

Supports two root USB hubs

♦

Supports up to four USB ports

♦

Supports two standard USB connectors (USB 0 & 1) and one 10-pin header (USB 2 & 3)

♦

Supports USB v1.1 and Universal OHCI v1.1

♦

Supports over-current fuses on board

•

Keyboard/Mouse Interface

♦

Supports PS/2 keyboard

Advertising