Accusys RAID Controller ACS-77100 - Manual (Page 28)

http://www.accusys.com.tw 27
User’s Manual
7. FAQ
If you encounter a problem while using the RAID box, check this section for help.
1. I have connected the ACS-77100 to host computer, but the host computer
cannot recognize the ACS-77100 in BIOS.
The array of the ACS-77100 must be created so that the host computer can recognize the RAID
in BIOS. Please make sure that an array is created.
2. My Operating System is Linux. I have enabled the over 2TB capacity setting, but
I still cannot partition a device over 2TB in OS. Why?
The ACS-77100 is over 2TB available, but most OS still cannot support SATA device to over 2TB.
Please refer to the below list for choosing the OS.
a) Microsoft Windows Vista