HT instruments HT701 - Manual (Page 18)

HT701
EN - 17
4.4.8. Temperature measurement
Fig. 9: Use of the instrument for Temperature measurement
1. Select the °C°F position.
2. Press the MODE key to select measurement in °C or °F.
3. Insert the provided adapter into the input terminals Hz°CV
 and COM, respecting
the red and black colours found on it (see Fig. 9)
4. Connect the provided K-type wire probe or one of the optional probes (see § 6.3.2) to
the instrument by means of the adapter, respecting the positive and negative polarity
on the probe’s plug. The display shows the value of temperature.
5. The message “OL” indicates that the value of temperature exceeds the maximum
measurable value.
6. For using the HOLD function, see § 4.2.1, for measuring MAX/MIN/AVG values see §
4.2.2 and for saving the result, see § 4.2.5