Acura 2011 TL - Manual (Page 553)

Loosen each wheel nut 1/2 turn
with the wheel nut wrench. Take the tool case out of the spare
tire.
Unscrew the wing bolt and take
the spare tire out of its well.
Take the jack out of the tool kit
case.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch. 7. 8.
6.
4.
5.
Changing a Flat Tire
550
WHEEL NUT WRENCH
JACKING POINT EXTENSION
JACK WHEEL NUT
WRENCH
10/07/29 12:52:32 31TK4620_555
2011 TL