Apogee Labs 2020 - Manual (Page 8)

INTERFACE CONTROLLER MODULE ETHCX1
2020-8 AL4300Series
5.25.04
APOGEE LABS, Inc.
Table 6 - HELP Response from ETHCX1
HELP – Displays each parameter with the range of possible settings
Command Entry Format HELP<CR>
System Response for Valid Command ><Displays Help Screen>
System Response for an Invalid
Command <CR>?
Sample Entry
System Response
>help<CR>
HELP
ETHCX1 1.0 (1.0 )
SET/READ IP ADDRESS
SET/READ NETMASK
SET/READ GATEWAY
SET/READ PORT
CONFIRM IP
RESET IP
CONTROL=ETHCX1, AL4300
>
2020.3.3.8 EXIT command
At the conclusion of a session the ETHCX1 may be disconnected by issuing the EXIT command.
>EXIT
Server has been disconnected
>