KANOMAX S388-70 Handheld Particle Counter Utility Software Manual - Manual (Page 17)

14
5. Communication Setting
To enable communication between the Handheld LPC and the computer, the RS232C COM port must be set.
5.1 Setting RS232C COM Port
To set the RS232C COM port, perform any of the following procedures:
1) Click: [Setting] →
2) Click:
3) Press the F5 key
The following RS232C Setting dialog box will open
Fig. 5-2 RS232C Setting Dialog Box
Caution: Select the COM port number which corresponds to the RS-232C port number of your computer.
Fig. 5-1 Setting Menu