KANOMAX S352-10 Piezobalace Dust Monitor - Manual (Page 12)

8
3.2 Transferring Data
Procedure for transferring data:
1) Select the appropriate communication port:(COM1 to COM8)
2) Select the drive name for where the data will be stored.
3) Select the destination folder for where the data will be stored.
4) Enter the file name the data will be saved under.
5) Click to transfer the data stored in the instrument to the computer.
The data will be displayed on the screen and stored on the computer in the location you specified above.
6) Program status will indicate “Read Data” while the data is being transferred. The status will change to
“Display” when the data transfer is complete.
7) Click to close the software.