Asus 1U Rackmount Barebone Server RS160-E3/PS4 - Manual (Page 109)

A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 6 - 5 6 - 5 6 - 5 6 - 5 6 - 5
6.2.1 6.2.1 6.2.1 6.2.1 6.2.1 Configuring the SCSI controller Configuring the SCSI controller Configuring the SCSI controller Configuring the SCSI controller Configuring the SCSI controller
You need to configure the SCSI controller before creating a RAID set. After
selecting the SCSI channel to use, the utility prompts you to select from the
available options. Use the arrow keys to select C o n f i g u r e / V i e w S C S I
C o n f i g u r e / V i e w S C S I C o n f i g u r e / V i e w S C S I C o n f i g u r e / V i e w S C S I C o n f i g u r e / V i e w S C S I
C o n t r o l l e r S e t t i n g s C o n t r o l l e r S e t t i n g s C o n t r o l l e r S e t t i n g s C o n t r o l l e r S e t t i n g s C o n t r o l l e r S e t t i n g s, then press <Enter>.
6.2.2 6.2.2 6.2.2 6.2.2 6.2.2 Enabling the HostRAID controller Enabling the HostRAID controller Enabling the HostRAID controller Enabling the HostRAID controller Enabling the HostRAID controller
To enable the Adaptec HostRAID controller:
1. Use the arrow keys to select the H o s t R A I D H o s t R A I D H o s t R A I D H o s t R A I D H o s t R A I D item in the Configuration
section.
2. Press <Enter> to set the item to E n a b l e d E n a b l e d E n a b l e d E n a b l e d E n a b l e d.
3. Press <Esc> to exit.
4. When the utility prompts you to
save the changes, select Y e s
Y e s Y e s Y e s Y e s,
then press <Enter>.