Atlantis Land A02-RAV260-W54 - Manual (Page 53)

VoIPMaster 260W
47
• Give DNS to Client: Controls whether the PPP Internet Protocol Control Protocol (IPCP)
can request a DNS server IP address for a remote PPP peer. Once IPCP has discovered
the DNS server IP address, it automatically gives the address to the local DNS client so
that a connection can be established.
• Give DNS to DHCP Server: Similar to the above, but gives the DNS server address to
the DHCP server.
• Discover Primary NBNS / Discover Secondary NBNS: This setting enables/disables
whether the primary/secondary NBNS server address is requested from a remote PPP
peer using IPCP. The default setting for this command is disabled.
• Discover Subnet Mask: Specifies if the subnet mask given by IPCP negotiation process
is to be used.
• Give Subnet Mask To DHCP Server: Enable to change your DHCP Server settings by
using the given information in IPCP negotiation process.
RFC 1483 Routing or IPoA routed(RFC1577)
• Description: Your description of this connection.
• VPI and VCI: Enter the information provided by your ISP.
• ATM Class: The Quality of Service for ATM layer.
• NAT: The NAT (Network Address Translation) feature allows multiple users to access
the Internet through a single IP account, sharing the single IP address. If users on your
LAN have public IP addresses and can access the Internet directly, the NAT function can
be disabled.
• Encapsulation method: Select the encapsulation format, the default is LLC Bridged.
Select the one provided by your ISP. (Only for RFC1483 Routed). Usually You have to
select LLC Routed.
• DHCP client: Enable or disable the DHCP client, specify if the router can get an IP
address from the Internet Service Provider (ISP) automatically or not.