ADT Security Services Focus 200 Plus - Manual (Page 24)

– 24 –
Quick Start (cont’d)

? FIRST BA GROUP

  Back CHR Forward 

  Left POS Right 

  Quit Continue     
The first line of the screen displays the current name with the cursor
on the first letter of the description. Use the POS (Cursor Position)
keys to move the cursor to the right and left through the description.
Use the CHR (Character) keys to scroll forward and backward
through the character list (letters, numbers, symbols, and spaces).
Similarly, you may change characters directly by using the
alphanumeric keypad, which is organized like the TouchTone dial on
a telephone.
Experiment with the alphanumeric keypad. The keypad allows you to
insert a character, space, number, or symbol at any location within
the group, point, or user name:
• Letters are entered by pressing the key corresponding to them on the
keypad. Pressing a key once, twice, or three times enters the first,
second, or third letter shown on the button. For example, press the 5
key three times to enter the letter L. The letters Q and Z are the
fourth letters for the 7 and 9 keys, respectively.
• Numbers are entered by pressing the 0 key once to enter the number
0, or by pressing the 0 key repeatedly to scroll through the numbers
until the correct one is displayed.
• Spaces are entered by pressing the 1 key.
• Symbols are accessible by pressing the 1 key and scrolling through
the entire character set using the CHR (backward and forward) keys.
Hint: Scrolling through the entire alphabet will take less time if you
hold the keys down instead of pressing and releasing them.