Interfaces – Altinex System Interface Audio & Equalization VA6822 User Manual

Page 3

Advertising
background image

INTERFACES

2

2

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using your
VA6822 Interface. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your VA6822 and to prevent
fire and shock hazard. Please read them carefully
and heed all warnings.

1.1 GENERAL

Unauthorized personnel shall not open the unit

since there are high-voltage components
inside.

Qualified ALTINEX service personnel, or their

authorized representatives must perform all
service.

1.2. SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE VA6822

Maximum operating ambient temperature is 35

(degrees C).

Never restrict the airflow through the devices’

fan or vents.

When installing equipment into a rack,

distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.

Connect the unit to a properly rated supply

circuit.

Reliable Earthing (Grounding) of Rack-

Mounted Equipment should be maintained.

1.3 INSTALLATION

For best results, place the VA6822 Interface

on a flat, level surface in a dry area away from
dust and moisture.

To prevent fire or shock, do not expose this

unit to rain or moisture. Do not place the
VA6822 Interface in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.

Handle the VA6822 Interface carefully.

Dropping or jarring can damage internal
components.

Do not place heavy objects on top of the

VA6822. If the VA6822 is to be mounted to a
table or wall, use only ALTINEX-made
mounting accessories like brackets
(DA1293FC or DA1294FC) and cables for
optimum setup.

To turn off the main power, be sure to remove

the cord from the power outlet. The power
outlet socket should be installed as near to the
equipment as possible, and should be easily
accessible.

Do not pull the power cord or any cable that is

attached to the VA6822 Interface.

If the VA6822 Interface is not used for an

extended period, disconnect the power cord
from the power outlet.

1.4 CLEANING

Unplug the VA6822 power cord before

cleaning. Clean surfaces with a dry cloth.
Never use strong detergents or solvents such
as alcohol or thinner. Do not use a wet cloth or
water to clean the unit.

1.5 FCC / CE NOTICE

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

This equipment has been tested and found to

comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the

Advertising