Audiovox AVP8280 - Manual (Page 25)

22
BEFORE CALLING AUDIOVOX TECHNICAL SUPPORT (1-800-645-4994)
Before calling, check the following points for a possible cause of the trouble. A minor adjustment on your part may eliminate the
problem.
SYMPTOMS CAUSE POSSIBLE SOLUTIONS
There is no power to the VCP.
Noise bars on screen.
Operation key does not work.
Cassette is ejected upon inserting.
Audio output does not change to Hi-Fi
mode.
• The power cord is not connected.
• The polarity of power cord is not
correct.
• Tracking is not adjusted.
• If the cassette or the VCP is not in
normal condition, every LED indicator
lights and the VCP is inoperative.
• Safety device works to protect the
cassette when it is inserted incorrectly.
• The cassette was recorded on a in
mono VCR.
• The first autotracking attempt is still
executing now.
• Check the power cord.
• Change the polarity of power cord.
• Adjust for a clear picture by pressing
the PLAY button.
• Turn the power off and on by pressing
the POWER button.
• Unplug and re-plug the power cord.
• Pull the cassette out (unloading) and
insert it firmly into the cassette
compartment.
• The cassette can not be played back in
Hi-Fi mode.
• Wait for a second.