Audiovox PROV710 S User Manual

Page 23

Advertising
background image

128-6743

23 of 26

-

23

-

No sound or
distorted sound

Make sure your DVD is connected

properly. Make sure all cables are
securely inserted into the appropriate
jacks.

If you are using the IR headphones,

make sure you turn on the IR power.

Make sure Modulator is ON and the

proper Frequency has been
selected.

You can’t advance through the

opening credits and warning
information that appears at the
beginning of movies because the
disc is programmed to prohibit that
action.

The feature or action cannot be
completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support
the feature (e.g., angles)
3. The feature is not available at the
moment.
4. You’ve requested a title or chapter
number that is out of range.

Can’t advance
through a movie

The icon ( )
appears on
screen

Troubleshooting

SOLUTION

PROBLEM

Poor in vehicle
radio reception
(FM modulator
installed)

IR sensor
inoperative

Check the condition of the vehicle’s

radio antenna.

Verify that the antenna is fully raised.

If a wired RF modulator has been

installed, verify that it is turned OFF.

Verify that the batteries in the remote

are fresh.

Verify that the remote sensor eye is

not obstructed.

Verify that the infrared transmitter is

affixed over the sensor eye of the
component to be controlled.

• Insert a disc with the label side facing

up.

• Check the type of disc you put into

disc tray. This DVD only plays digital
video discs, audio CDs and MP3s.

• Both the unit and the disc are coded

by region. If the regional codes don’t
match, the disc can’t be played. This
DVD Player is Region Number 1.

• The disc is dirty. Clean it.
• Condensation has formed. Allow
player to dry out.

Disc won’t play

Play starts, but
then stops
immediately

SOLUTION

PROBLEM

Advertising
This manual is related to the following products: