Safety warnings – KYORITSU 5000 Instruction Manual User Manual
Page 3
― 1 ―
1. Safety Warnings
This instrument has been designed, manufactured and tested according
to IEC 61010: Safety requirements for Electronic Measuring apparatus,
and delivered in the best condition after passed the inspection. This
instruction manual contains warnings and safety rules which must be
observed by the user to ensure safe operation of the instrument and
retain it in safe condition. Therefore, read through these operating
instructions before using the instrument.
WARNING
¡
Read through and understand the instructions contained in this
manual before starting to use the instrument.
¡
Save and keep the manual at hand to enable quick reference
whenever necessary.
¡
Be sure to use the instrument only in its intended applications.
¡
Be sure to understand and follow all safety instructions contained
in the manual.
Be sure to observe the above instructions. Failure to follow the above
instructions may cause injury, instrument damage and/or damage to
equipment under test.
The symbol indicated on the instrument means that the user must
refer to related parts in the manual for safe operation of the instrument.
Be sure to carefully read the instructions following each symbol in
the manual.
DANGER
is reserved for conditions and actions that are likely to
cause serious or fatal injury.
WARNING
is reserved for conditions and actions that can cause
serious or fatal injury.
CAUTION
is reserved for conditions and actions that can cause a
minor injury or instrument damage.