Revo R4CMB-500 - Manual (Page 31)

4 Channel Digital Video Recorder
25
Camera Menu
Selecting
(Camera Menu) in the Live Monitoring menu displays the following Camera Menu.
 Zoom: Selecting Zoom and choosing the camera number zooms the current image of the selected camera on the
screen. It is the same as pressing the Zoom button on the remote control. You can move the enlarged video around
using the arrow buttons on the remote control. Pressing the (Enter) button on the remote control in the Zoom mode
toggles the zoom size between 2x, 3x and 4x. Exit the Zoom mode by selecting Zoom again from the Camera Menu
or pressing the
Zoom button again. While in the Zoom mode, the icon displays in bottom-left corner if Zoom is
selected in the Display setup screen (OSD tab).
 Mic/Color Control: Selecting Mic/Color Control allows you to control the volume of the microphone and control
brightness, contrast, hue and saturation for each selected camera if a user who has Color Control authority logs into
the system. It is the same as pressing and holding a camera button for a few seconds.
NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to making any image
adjustments using the DVR‘s controls.
NOTE: Any image adjustments you make will be applied to both the live video on the monitors and the recorded
video.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on each camera screen.
LCD Off
Selecting
(LCD Off) in the Live Monitoring menu turns the LCD monitor off.
NOTE: The LCD monitor can be turned back on by moving the mouse quickly, clicking the mouse button or
pressing any button on the remote control.
Setup
Selecting
(Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to Chapter 3 ─ Installation and
Configuration for detailed descriptions of system setup.
Search Mode
Selecting
(Search Mode) in the Live Monitoring menu exits the live monitoring mode and enters the search mode.
It is the same as pressing the Playback Mode button on the remote control.
Login/Logout
Selecting
(Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to enter the password
to log into the system. Selecting (Logout) in the Live Monitoring menu displays the Logout screen asking you to
confirm whether or not you want to log out the current user.
MOUSE DISPLAY MENU
In the Live Monitoring mode or Search mode, moving the mouse pointer to the left edge of the screen displays the
following Mouse Display menu.