Revo RECDH36-1 - Manual (Page 13)

1. E/I (on/off)
When set to the ON position, the electronic iris switch automatically varies the
camera's shutter to mimic auto-iris control, allowing fixed or manual iris lenses to
be used in a wider range. When this switch is set to ON, turn the F/F switch OFF.
2. FF (on/off)
This function is used for removing flicker, when camera signal format does not
coincide with power source frequency being used.
3. BLC (on/off)
This on/off switch controls backlight compensation. When set to ON, the camera
will automatically try to maintain proper exposure in the specific area even if the
lighting level changes.
4. AGC (off/on)
The auto gain control switch allows the video signals to maintain a constant level.
This switch is useful when using the camera at low-light levels and when lighting
levels change over time. For best low light conditions, this switch should set to ON.
5. D/N (Auto/Color)
Use this switch to set the camera Day/Night mode Auto(ON) or Color(OFF)
Auto : D/N mode converse automatically (AGC must set to ON)
Color : Only Color
CN4
ON
1 2 3 4
EI AGC FF BLC
5
D/N
6
N.C.
CN3
6. N.C (no function)
7
FUNCTION SWITCH