Revo REJCPTZ-2 - Manual (Page 8)

3. Move the Joystick, Observe Camera Motion.
If the PTZ camera’s view cannot be changed with the joystick, check the
wiring, protocol, Baud rate, and the camera’s ID.
4. Enable The Camera’s OSD (On Screen Display) Menu.
To access the menu on the PTZ camera, ensure that the keyboard’s “CAM”
number matches the desired PTZ camera, and press the keyboard’s “MENU”
button. The camera’s OSD menu will appear on the video monitoring device.
Press【TOUR】to enter Tour menu
Press【MENU】to enter Dome menu
Press【SHIFT】+【MENU】to enter Pattern menu
Press【AUTO】to enter Auto scan menu
Press【SHIFT】+【ESC】to enter Alarm menu
Home key:【SHIFT】+【TOUR】
ESC key:【ESC】
Enter key:【ENTER】
Menu Control (Inside camera menu):
Twisting the joystick changes the alpha-numeric characters when entering
naming information.
Dome Menu Operation:
Press MENU to enter the dome’s OSD.
Up Joystick: Moves cursor up
Down Joystick: Moves cursor down
Twist Joystick Right: Moves cursor right, activates” Save and Exit” in some
menus.
Twist Joystick Left: Moves cursor left, activates” Save and Exit” in some
menus.
CTRL or Right Joystick: Selects a menu item.
ESC cancels a menu item, or functions as a “Back” command.
3
16