Revo REJCPTZ-1 - Manual (Page 24)

17
Figure 8 ± MUX configuration
Set Slave Kbd
This screen allows you set up Slave KBD controller, how many the slave KBD controller and Mux menu
controllability and DVR menu controllability, etc.
1. Slave KBD
ON: Slave KBD controller can control the unit which is connected Master
KBD controller.
2. MUX control ON: Slave KBD controller is allowed to access Mux setup menu.
3. DVR control
ON: Slave KBD controller is allowed to access DVR setup menu.
4. Dome Menu
ON: Slave KBD controller is allowed to access Dome menu setup.
5. Slave KBD Unit
Enters the Slave keyboard unit submenu.
Save and exit
Save the changed settings and return to the previous menu
Slave KBD Unit
This setup allows you set up the slave keyboard, how many slave keyboards.
To use the slave keyboard, set ON.
3.3 Camera
Cam : Camera ID
PR
: Protocol[F2,F2E,P-D(PELCO-D),P-P(PELCO-P)]
PT : Port[D1(DOME1),D2(DOME2)]
BR : Baud rate
This camera setup is listed up to 64 cameras and the camera ID has up to 3999.
When the keyboard has that the Alarm Check option is ON, the camera setup is set automatically after the
keyboard checks the camera at the first power on or after the scan dome function.
Set Slave Kbd
1.Slave KBD : OFF
2.MUX cont : OFF
3.DVR cont : OFF
4.Dome Menu : OFF
5.Slave KBD Unit
Save and Exit
Slave KBD Unit
1.Slave ID1 : OFF
2.Slave ID2 : OFF
3.Slave ID3 : OFF
Save and Exit
Cam<- PR PT BR
0001 F2E D1 9600