Revo REVDN600-1 - Manual (Page 11)

7
1) LENS
2) BRIGHTNESS
3) BACKLIGHT
4) SHUTTER
5) AGC
6) SENSE UP
7) ECLIPSE
8) 3D-DNR
9) DRC
10) RETURN
DC, ELC can be selected.
0 to 60 can be selected.
Level setting is available in DC, ELC mode.
*
ON or OFF can be selected. (BLC level, location)
Prevents such a back light effect to secure a clear image under
*
all illumination environments.
1/60 (1/50), FLC, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10000
1/30000, 1/60000, 1/120000 sec.
When LENS is DC, it is possible to select it.
*
Another becomes NOT USE.
AGC OFF, LOW, MID, HIGH can be selected.
As the level of gain increases, the screen gets brighter and the level
*
Of noise also increases.
OFF, x2, x4, x8, x16, x32, x64, x128, x256 can be selected.
SENSE UP helps maintain a bright, clear screen image
*
by automatically detecting change in the level of light
ON or OFF can be selected.
The function improves the identification capability of subjects facing
* a brightly lit situation by filtering out the strength of the light.
can be selected.
Reduces the noise on the screen under low light condition
*
The function to visibly brighten a subject in a dark area
*
Return to MAIN MENU.
OFF, LOW, MID, HIGH
ON or OFF can be selected.
<EXPOSURE>
Press the [LEFT] or [RIGHT] button to access the "EXPOSURE" mode.
<WHITE BALANCE>
Press the [LEFT] or [RIGHT] button to access the "WHITE BALANCE" mode.
- ATW
- AWC
- INDOOR
- OUTDOOR
2) RED CONT
3) BLUE CONT
4) PUSH AUTO
5) RETURN
- MANUAL
This mode can be used within the color temperature range
1.800°K ~ 10.500°K
Please press the [LEFT] or [RIGHT] button in the PUSH AUTO mode
while the camera is directed at a piece of while paper to obtain the
optimum state under current illumination.
If the environment including the light source is
changed, you have to adjust the White balance again.
Set the color temperature to 3200˚K
Adjust Red Gain Value (0 ~ 127)
Can be adjust while in manual mode.
Adjust BLUE Gain Value (0 ~ 127)
Can be adjust while in manual mode.
When it is AWC, OFF to PUSH can be selected.
Return to MAIN MENU.
Manual mode. User can change R and B Gain manually.
Set the color temperature to 6300˚K
1) WB MODE