Revo REXN600-2 - Manual (Page 11)

6
<DAY/NIGHT>
Press the [LEFT] or [RIGHT] button to access the "DAY/NIGHT" mode.
1) D/N MODE
- AUTO
- DAY
- NIGHT
- EXT
2) AUTO LEVEL
3) FILTER DLY
4) SENSOR IN
5) BURST
AUTO, DAY, NIGHT, EXT can be selected.
This camera has a function which automatically changes to
the appropriate mode for day-time or night-time.
In this mode, the camera outputs the video image only in color.
In this mode, the camera outputs the video image only in black and white.
In this mode, an external signal changes the camera output from the
COLOR mode to BW mode and back.
When set to AUTO, the 0 to 3 values can be selected.
AGC LOW : 0 AGC MID : 0 ~1 AGC HIGH : 0 ~3
*
When set to AUTO, 4 to 10 can be selected.
When AGC is OFF, NOT USED.
Adjust the delay time of filter movement when changing
*
from on to off or off to on .
When it is EXT, No or NC Can be selected.
When it is DAY, Not Use.
Another mode be comes ON or OFF can be selected.
<MOTION>
Press the [LEFT] or [RIGHT] button to access th "MOTION"mode.
1) DETECT MODE
2) DETECT AREA
3) SENSITIVITY
4) ALARM TIME
5) RETURN
ON or OFF can be selected.
Turning on becomes invalid while displaying OSD.
*
However, it becomes effective only at MOTION AREA.
MOTION AREA is displayed.
0 to 8 can be selected.
1 to 60 sec can be selected.
Return to MAIN MENU.
<PRIVACY>
Press the [LEFT] or [RIGHT] button to access the “PRIVACY” mode.
1) AREA
2) MASK
3) MODE
4) LEVEL
5) TOP
6) DOWN
7) LEFT
8) RIGHT
9) RETURN
1 to 24 can be selected.
ON or OFF can be selected.
When MASK is ON, BW, MOSAIC, COLOR can be selected.
- BW : 0 to 15 can be selected.
- MOSAIC : SMALL or MIDDLE or LARGE can be selected.
- COLOR : RED, BLUE, GREEN, YELLOW, CYAN, MAGENTA
can be selected.
When MASK is ON, 3 to 124(NTSC) or 6 to 150(PAL) can be selected.
When MASK is ON, 5 to 126(NTSC) or 8 to 152(PAL) can be selected.
When MASK is ON, 0 to 187(NTSC) or 0 to 185(PAL) can be selected.
When MASK is ON, 2 to 189(NTSC) or 2 to 187(PAL) can be selected.
Return to MAIN MENU.
*EXT : Only D&N with ICR Model (Option)
*SENSOR IN : Only D&n with ICR Model.(Option)
Return to MAIN MENU. 6) RETURN