Revo REVDPTZ10-1 - Manual (Page 10)

2.2 Base Installation, continued
2. Extract each wire through the cable hole and wire the supplied power,
RS-485 and alarm-in connecter .
3. Attach the safety wire for securing the dome camera to ceiling or structure
not to fall.
4. Unlock 4 torx screws on the dome cover and lock the dome base firmly with
supplied 4 fixing screws.
Warning: Fasten the fixing screws of the dome camera firmly, or the dome
camera could fall, causing injury.
5. Lock the housing cover with 4 torx screws.
CEILING
The housing can also be mounted
on a 4s or 2s electrical box.
WHEN MOUNTING HOUSING TO
THE ELECTRICAL BOX
ELECTRICAL
BOX
Torx screws
UNC 8-32 x 0.75
Rubber
Washers(4x)
WHEN USING PIPE OR PLUG
If you want to use a pipe or plug, you
should remove the hole grommet
outside and seal using sealant
(not supplied) not to be intruded water.
SILICON SEALANT
(not supplied)
Safety wire
M3x5 screw
To structure
(not supplied)
5