Revo REXT650-1 - Manual (Page 13)

- 7 -
In low luminance environment, the accuracy is down of the result.
In very low luminance environment, operation is not be performed.
It is not be performed when moving object is exist.
<System Setup>
1) Cam Info : Camera basic information display
Cam ID/Baud rate/Protocol/Firmware Ver./CCD Type/Lens Type
2) General Setup
 System Lock : Configuration Lock.
 When system lock is set to “Lock”, User must to input 4-character password to
enter OSD menu.
Default password is “0000”.
 Change PID : Change the administrator's password
 Move cursor with OSD Key and Press Enter to input the character.
 Comm(RS 485 Communication) : Press the Enter button to access the Comm.
 Cam ID : Select the camera ID (001 - 255).
 Baud Rate : Select serial communication speed (2400/4800/9600/19200).
 Protocol : RS-485 protocol. (COMMAND/FASTRAX/PELCO-D/Pelco-D)
 Title : Edit camera title.
A. Title
B. Delete character
C. Character table
D. Command line
- Clear : Clear Title
- Cancel: Cancel editing
- Accept: Save Title
 Display : Display item select.
 Cam ID : Camera ID display On/Off.
 Title : Title display On/Off.
 Alarm .
 Period : Alarm out period (5sec/10sec/20sec/30sec/1min/5min/Cont.)
 Snooze : Alarm out snooze(Off/5sec/10sec/20sec/30sec/1min/5min)
 Active pol : Alarm output active state configuration. (Low, High)