Satechi 10000 mAh Portable Energy Station Extended Battery Charger Pack - Manual

Portable Energy Station 10000
ST-B10000
Lithium-Ion
Mobile Charger
User Manual
Contents Introduction
1 2 3 4 5 6 7 8
2 Introduction
2 Features
3 Product Contents
3 Specifications
4 Functions
6 Charging
8 Product Care
8 Warranty
The Portable Energy Station 10000 is a high-capacity
battery pack powerful enough to charge two devices
simultaneously. It can be used to charge your most
commonly used electronic devices such as your smart
phone, tablet, music player, digital camera, or other
device. The battery is compact and light enough to be
carried in backpacks or handbags to accompany your
electronic devices. Just charge the Energy Station to
capacity and it will be ready to take with you to power
your devices when you’re on the go.
Functions
1. Standard Mini USB Charging Port (Input 5.0V)
Please charge the Energy Station with the included
wall adaptor - connecting the battery to a computer’s
USB port will not output sufficient charging power.
Charging
Before first use, charge the Energy Station to full capacity
To charge the Energy Station
1. Plug the wall adaptor into a wall socket
2. Connect the USB charging cable to the adaptor
3. Connect the Mini USB adaptor to the wall adaptor
4. Plug the Mini USB tip into the Mini USB port of the
Energy Station
Product Care
- Store the battery in a dry area
- Do not store the battery in hot areas
- Avoid dropping, throwing, or any rough handling
- Do not attempt to disassemble the battery
Warranty
©2012 SATECHI
1 YEAR WARRANTY:
Satechi warrants this product to be free from defects in
materials and workmanship for 1 year. If this product is
found to be defective, we will repair or replace it.
If you have any questions, comments, or concerns about
your Satechi product, please contact us first.
Phone: 858-268-1800
Email: [email protected]
www.satechi.net
LED lights will turn on when the Energy Station is
charging.
2. LED Power Indicator
Please charge the Energy Station with the included
wall adapter - connecting the battery to a computer’s
USB port will not output sufficient charging power.
3. LED Power Indicator: Output Charging
LED lights are on: connected device is charging
LED lights turn off sequentially: charging is complete
4. LED Power Indicator: Input Charging
LED lights are on: battery is charging
5. Powering On the Energy Station
Press & hold the Function Button for about 3 seconds
until the LED lights turn on.
6. Powering Off the Energy Station
Press & hold the Function Button for about 3 seconds
until the LED lights turn off.
Note: If a device with a higher output current than the
Energy Station’s output port is plugged in, the battery
pack will automatically shutoff. The port can then be
reactivated by turning the battery on again.
To conserve energy, turn the Energy Station off when not
in use.
Specifications
Battery: Lithium Polymer
Capacity: 10000mAh
Input Voltage: DC5.0V
Input Current: 2000mA
Output 1: DC5.0V/2A
Output 2: DC5.0V/1A
Charging Duration: ~ 7-9 hours
Dimensions: 5.7” x 2.3” x 0.8”
Weight: 7.4oz
Product Contents
Adaptors
Features
- Sleek, simple and compact design
- Power button
- Dual USB charging ports
- Energy saving function that shuts off battery when not
in use
- LED indicator displays remaining power
- Charging and discharging overload protection
- Current overload protection
Battery Pack
USB Charging Cable
Wall Adaptor
Function Button
Wall
Adaptor
USB Charging
Cable
Mini USB
Adaptor
Mini USB
Port
Mini USB
Charging Port (Input)
USB Charging
Port (Output)
E
D
C
B
A
LEVEL
CHARGE <20% 20-40% 40-60% 60-80% 80-100%
A B C D E
To charge a device
1. Plug the correct adaptor into your device’s charging
port
2. Connect the USB charging cable to the adaptor
3. Plug the USB charging cable into one of the charging
ports of the Energy Station
LED lights will turn on when the Energy Station is
charging.
USB
Charging Port
Adaptor USB Charging
Cable
Device