Seametrics FlowInspector - Manual (Page 8)

warnInG! Clicking this button will
erase all previous data in the Logger
and reset the totalizer. Be sure you
have downloaded any stored data
you wish to preserve before click-
ing Clear. Click Cancel if you wish to
abort the set-up operation without saving settings.
Page 4
SeT uP your LoGGer
ID
This is an optional field in which you may enter an alphanumeric string that will help to easily differentiate one Logger
from another during data analysis (e.g., Pump Station 3).
Cycle Time / Storage Time
There is an inverse relationship between the frequency of data collection (cycle time) and maximum capacity (storage
time). Shorter cycle times provide a more detailed flow curve but shorten the number of days until the logger memory
is full. Longer cycle times give less detailed data over a longer time period. Select the cycle time and storage time
best suited to your application.
Cycle Time Storage Time
(in seconds) (in days)
15 11
30 22
60 44
240 180
480 360
1450 1080
Stop when full
When the Logger’s memory is full, it can either 1) stop recording data, or 2) return to the beginning of the recorded
data and begin overwriting the earliest measurement data points. In the first case, the total will stop accumulating
until the Logger has been manually cleared and reset. In the second case, the running total will continue to accumu-
late even though the earlier specific data points are overwritten. Choose which condition you prefer by checking or
unchecking the “Stop when full” box.
Clear Memory and Save Settings to Logger
Clicking this button will save your chosen settings and end Setup.
Cancel
Click this button to exit the screen without saving changes to your Logger settings. Use this button when you have
changed your mind about resetting your Logger.
DL number
The DL Number you assign here will be included in the Logger file name to differentiate it from other Loggers when you
analyze your data. assign any number you choose, up to six digits.