Alliance Laundry Systems Topload Washer - Manual (Page 3)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3 201958
Installation
Step 1: Remove the Shipping Brace and
Shipping Plug
Remove the shipping brace from under the lid.
The shipping plug will be released from the base of the
washer when removing the cardboard base from the
washer. Refer to Figure 3.
NOTE: Do not tilt washer to front or sides when
moving.
Save the shipping brace and plug. They must be
reinstalled whenever washer is moved or transported
to a new location. This will prevent damage to the
washer. Refer to the User’s Guide for instructions on
reinstalling the shipping materials.
Step 2: Wipe Out Inside of Washtub
Prior to first wash, use an all purpose cleaner, or a
detergent and water solution, and a damp cloth to
remove shipping dust from inside of washtub.
TLW1975N
1 Shipping Brace
2 Shipping Plug
3 Cardboard Base
Figure 3
1
3
2
TLW2009N
Figure 4