Seametrics FT520-86 - Manual (Page 4)

Repair
The only field-repairable component on the FT522 is
the fuse. If failure is due to a cause other than a blown
fuse, it is necessary to replace the entire board stack.
Contact your distributor for information.
5.50"
gasket
PANEL
CUTOUT
5.50"
6.03"
6.03"
1/4" holes (4 required)
Panel Cut-out Dimensions
Caution: Always disconnect
power to the unit before
opening the terminal cover.
Do not reconnect power until
all connections have been
made and the terminal cover
has been replaced.
!
20419 80th Ave. So., Kent WA. 98032 USA
Phone: 253-872-0284 Fax: 253-872-0285
www.seametrics.com 1-800-975-8153
4 of 4