Seametrics WMP104 - Manual (Page 2)

FEATURES
WMP104
Plastic-Bodied Magmeter
Clamping flanges for ease of installation
Cross-drilled screws (2) for tamper-evidence
Corrosion-resistant glass-filled polypropylene body
Lightweight for easy handling
2” full port
Flange clamps
150 psi or 10.3 bar working pressure @ 70˚ F
10˚to 130˚ F (-12˚- 54˚ C)
+/-1% of reading from 100% to 10% of full scale
+/-3% of reading to cut off
6 gallons per minute (.375 liters per second)
300 gallons per minute (18.9 liters per second)
Glass-filled polypropylene
316 stainless steel
Diecast aluminum, powder-coated
Polyethylene
Rate Total
6 8
Gallons/Minute Acre-Feet; Acre-Inch; Gallons x 1000; or Cubic Feet
Cubic Feet/Second Cubic Feet
Cubic Feet/Minute Acre-Feet
Liters/Second Cubic Meters; or Megaliters
Liters/Minute Cubic Meters
Cubic Meters/Minute Cubic Meters
Cross-drilled screws and tamper-evident seal
6 AA alkaline cells, replaceable Life: 1 year with meter in use; 3 years dry
Hardware/software, conductivity-based
NEMA 4X standard; -40˚ to 176˚ F (-40˚ to 80˚ C) storage
Pipe Size
Fittings
Pressure
Operating Temperature Range
Accuracy
Flow Range Minimum
Maximum
Materials Body
Electrodes
Electronics Housing
Display Cover
Display
Digits
Units
Security
Power
Empty Pipe Detection
Environmental
SPECIFICATIONS*
Powder-coated diecast-aluminum electronics housing
LCD rate and total indicator
316SS electrodes
Polyethylene protective cover
*Specifications subject to change • Please consult our website for current data (www.seametrics.com).
SeaMetrics Fitting Kit
OBSOLETE