SHIMPO DT-311J-230V - Manual (Page 3)

2. SPECIFICATIONS
(1) Flashing range 200 – 1,500 rpm
(2) Phase shift 0 – 359º
(3) Internal signal range 200 up to 1,500 rpm
(4) Delay setter ROTARY ENCODER
(5) Display 4 digits, 10mm high, Red LED
(6) Divided ratio 1/1, 1/2, 1/3, 1/4, 2/4 with shift
(7) Input signal High level, 5 to 24v pulse width,
2 msec min.
Low level, 0 to 1v pulse width,
2 msec min.
1p/r.
Output impedance less than 10k
ohms
(8) Input impedance 47k ohms
(9) Display mode phase shift (degree), Tachometer
(10) Accuracy +/- 1 digit
(11) Flash tube Xenon lamp: Max 10W at 1,500 rpm
Life: 100 million flashes
(12) Operating temperature 32º - 104º F (0 - 40º C)
(13) Power requirement
110 VAC, (230VAC model) +/-10% at
50/60 Hz
(14) Power consumption 20 VA MAX
(15) Dimensions 8.43”L x 5.87”W x 6.85”H
(214 mm x 149 mm x 174 mm)
(16) Weight 4.19 lb (1.9kg)
(17) Accessories included 6m (19’) cable with connector, 1 pc.
Instruction manual, warranty card