SHIMPO DT-365E - Manual (Page 8)

8
3 Part names and functions
3.1 Main unit
Super luminosity LED (6 lights)
Power switch
Signal jack port
Operation
section
Dedicated AC adapter port
3.2 Operation section
②
①
③
⑤
④
No. Name Function description
① Power switch Turns the power ON/OFF.
② Dial Used to change the emission frequency or emission duration.
③ MODE key
Each press of this key switches the number display in the following order: Emission
frequency (FPM), Emission duration, Emission delay duration (PHA), Emission
frequency (FPM)...
④ x2 key
Each press of this key on internal oscillation emission allows the performance of
emission by the double count as the current set emission count (frequency).
⑤ ÷2 key
Each press of this key on internal oscillation emission allows the performance of
emission by the half count as the current set emission count (frequency).