SHIMPO DT-315P - Manual (Page 2)

1. CAUTION
* Do not operate or store in the following places:
1. Explosive areas
2. Places where water, oil, chemicals, or dust, etc. exists
3. Places where the temperature is over 104°F (40°C)
* Avoid looking at the emitted light for long periods of time.
It may hurt your eyes.
* Do not attempt to dismantle or repair this unit.
* Use tripod screws 1/4-20unc, length 8mm or shorter for the tripod screw
holes on the bottom.
* Charge the battery before using the unit for the first time.
* After the power has been on for 10 minutes, the flashes will stop and the
display will flicker to protect the life of the xenon lamp. To continue
measuring, re-power on.
2. DIMENSIONS