SHIMPO MT-100 - Manual (Page 3)

2
TROUBLESHOOTING
No Display:
• Confirm that the POWER button is operating properly.
• Confirm that the batteries are fresh. Install new batteries.
• Confirm that the batteries are inserted into the tachometer with correct polarity.
DIMENSIONS AND SPECIFICATIONS
S P E C I F I C A T I O N S
MODEL MT-100
Display 5 digit 0.47”(12 mm) height LCD
Revolutions per Minute (RPM) 1.0 - 25,000
Surface Speed (Using 6” Wheel) m/min: 0.1 - 3,809.8 yards/min: 1.0 - 4,166.4 inch/min: 3 - 99,999 feet/min: 0.2 - 12,499
Length (Using 6” Wheel) m: 0.01 - 99,999 yards: 0.01 - 99,999 feet: 0.1 - 99,999 inch: 1 - 99,999
Total number of revolutions (rev) 0.1 - 99,999
Measuring Accuracy Revolution: 1.0 - 599.9 rpm: ±1 rpm, 600 - 25,000 rpm: ±0.006% and ±0.5 digit
Surface Speed, Length: 0.4% and ±1 digit
Memory function 14 readings are stored in memory and retained for 5 minutes (Last, Max., Min., Average, and 10 selectable measurements)
Update Time 1 second
Detection Optical coupler, 20 pulses per revolution
Auto POWER Off function 5 minutes
Batteries Included 3 AA 1.5V
Low Battery Indicator Flashing “LO BAT” display
Over Range Indicator Flashing “OVR” display
Operating Temperature 32-113ºF (0 - 45ºC)
Construction ABS resin
Outside dimensions 4.83”L x 2.52”W x 1.24”H (122.5 mm x 64 mm x 31.5 mm)
Weight 0.37 lb (170 g)(including batteries)
Accessories Carrying case, cone adapter, funnel adapter, master wheel (6” cir.), NIST certificate, operation instructions