SUOMY Communication System SCS - Manual (Page 86)

84
8. Pairing with an MP3 player
The SCS kit has a Bluetooth® A2DP profile, which lets you listen to your •
music inside the helmet through an MP3 player (with a Bluetooth® com-
munication interface) or a mobile phone (with the same A2DP profile).
This procedure pairs your Bluetooth® MP3 player with the SCS kit and
•
must be followed the first time you use the MP3 player with the kit.
The MP3 player will detect the SCS kit as a normal earpiece.
•
Proceed as follows:
With the device switched off, press and keep the ON button pressed •
for 8 seconds (it will emit a triple high-pitched tone) to enter the MP3
pairing mode
Add a Bluetooth® device to your MP3 player (see player’s instruction
•
manual)
The MP3 player will then display the devices detected, select Suomy-
•
Com (or the name which has been set using the configurator)
The MP3 player will ask for a password, enter 0000 and press OK
•
If the pairing has been completed successfully, you will hear a tone of •
confirmation
When the MP3 player is paired with the SCS kit, please consult the instruction
manual of your MP3 player so that you can listen to your music.
NOTE: some MP3 players do not automatically connect after entering the
code 0000.
In this case, proceed in one of the following ways:
Medium press the ON button and •
Proceed with connection (as shown in the user’s manual of the player) •
using the Bluetooth® menu of your MP3 player
For more information on the A2DP profile, please visit the site www.a2dp.
info .
-